Luminaires thermal aging rack is used for light source and lamp aging life test. The equipment adopts PLC programming control, which can control the lamp aging time and cycle time, etc. It is divided into 3 layers of independent control for various luminaires test requirements. It is equipped with 3 sets of independent voltage regulators, and the voltage values can be display independently.
1. Rack structure: It is divided into three layers, the upper layer is configured with 30 pieces of E27 lamp holders for testing the E27 luminaires, the middle layer is configured with 16 pieces of terminals for testing luminaires are powered directly with a connection to the power cables, and the lower layer is configured with 16 pieces of universal sockets for testing luminaires are powered through a plug.
2. Rack material: made of painted sheet metal, with universal feet at the bottom.
3. Rack dimensions are approx.: L2600mm*W700mm*H1800mm
4. Voltage regulator: 0 ~ 300V, 3KW
5. Control: 3 independent voltage adjustment and displaying, 3 independent setting of aging cycles.
a) Test cycles setting: 0-999999.
b) Power-on time setting: 0-99H99M99S.
c) Power-off time setting: 0-99H99M99S.
6. Operation: Weinview brand, 7-inch color touch screen.
7. PLC: Mitsubishi PLC.
8. Voltmeter: Taiwan CW Instrument
9. All sample wiring is high temperature resistant
10. Equipment power: AC220V, 50HZ, 1KW.
11. Sample power: AC220V, 50HZ, 10KW.
Luminaires thermal aging rack is used for light source and lamp aging life test. The equipment adopts PLC programming control, which can control the lamp aging time and cycle time, etc. It is divided into 3 layers of independent control for various luminaires test requirements. It is equipped with 3 sets of independent voltage regulators, and the voltage values can be display independently.
1. Rack structure: It is divided into three layers, the upper layer is configured with 30 pieces of E27 lamp holders for testing the E27 luminaires, the middle layer is configured with 16 pieces of terminals for testing luminaires are powered directly with a connection to the power cables, and the lower layer is configured with 16 pieces of universal sockets for testing luminaires are powered through a plug.
2. Rack material: made of painted sheet metal, with universal feet at the bottom.
3. Rack dimensions are approx.: L2600mm*W700mm*H1800mm
4. Voltage regulator: 0 ~ 300V, 3KW
5. Control: 3 independent voltage adjustment and displaying, 3 independent setting of aging cycles.
a) Test cycles setting: 0-999999.
b) Power-on time setting: 0-99H99M99S.
c) Power-off time setting: 0-99H99M99S.
6. Operation: Weinview brand, 7-inch color touch screen.
7. PLC: Mitsubishi PLC.
8. Voltmeter: Taiwan CW Instrument
9. All sample wiring is high temperature resistant
10. Equipment power: AC220V, 50HZ, 1KW.
11. Sample power: AC220V, 50HZ, 10KW.
