flammability test apparatus
"
500W Copper Block and Thermocouple Set IEC 60695-11-3 Glow Wire Test Accessory
500W Copper Block and Thermocouple Set IEC 60695-11-3 Glow Wire Test Accessory Product Overview: The 500W Copper Block and Thermocouple Set is designed in full compliance with IEC 60695-11-3, ensuring precise and reliable temperature measurement for glow-wire and fire hazard testing. This set includes a precision-machined copper block and a high-quality K-type thermocouple, delivering consistent performance and excellent thermal stability for laboratory and compliance testing
IEC 60950-1 Hot Flaming Oil Test Device Control For Test Flammable Liquids In Electronic Equipment
IEC 60950-1 Hot Flaming Oil Test Device Control For Test Flammable Liquids In Electronic Equipment Product Information: The flammability test of thermal combustion oil test device is designed and manufactured according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is used to simulate that the flammable liquids used in electrical and electronic equipment may ignite due to overheating and
Glow - Wire U Type IEC 60695-2-10 Nickel Chromium Element
Glow-wire Glow-wire U Type Nickel / Chomium Element for Flammability Test Chamber Product overview: This glow-wire meets the requirements of IEC 60695-2-10 clause 4.1. The glow-wire is formed from nickel/ chromium (> 77 % Ni/20 1 % Cr) wire, having an overall diameter of 4.000.07mm (before bending). The dimensions of the glow wire loop are as detailed in Figure 1. Technical Parameters: No. Item Parameters 1 Material nickel/ chromium (> 77 % Ni/20 1 % Cr) 2 Diameter 4.00
IEC 60335-2-17 Electrical Blanket Spark Ignition Testing Equipment
IEC 60335-2-17 Blanket Spark Ignition Test Apparatus Product overview: This device meets the standard of IEC 60335-2-17, Clause 30.101 Figure 113 & 113a. It is used to inspect the flexible electrical heating appliance flammability, to test whether the charged body arcing caused overheating or combustion. In a 65 2 C in a heating cabinet, supply the sinusoidal rated output voltage 10KV, pass through the position where is 60.1mm far from the two 3mm copper electrodes
IPX8 Pressure Water Tightness Test System IEC 60529 For Testing Waterproof Capabilities
IPX8 Pressure Water Tightness Test System IEC 60529 For Testing Waterproof Capabilities Product introduction: The high pressure water tank is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under continuous immersion in water at degree IPX8 as per IEC 60529:2013. The water tank is made of stainless steel, the equipment is controlled by PLC, test parameters
ASTM G154 UV UVA340 Lamp Weathering Aging Test Chamber Programmable
Programmable ASTM G154 UVA 340 Weathering Aging Test Chamber Product Description This UV weathering accelerated ageing test chamber adopts UV light generated by the fluorescent ultraviolet lamps to simulate sunlight, and uses condensation moisture to simulate rain and dew. The sample is tested in a cycle of alternating light and moisture at a certain temperature, the hazards that occurred outdoors for months to years can be reproduced by UV within several days or weeks, so as
ISO 4892-1-2016 UV Weathering Accelerated Ageing Test Chamber
ISO 4892-1-2016 UV Weathering Accelerated Ageing Test Chamber Product Description This equipment uses a fluorescent ultraviolet UV lamp to simulate the effect of sunlight, uses condensed moisture to simulate rain and dew, and puts the test material in a cycle program of alternating light and moisture at a certain temperature for testing. It can detect paint, ink, paint, resin, plastic, rubber, printing and packaging, aluminum profile, adhesive, automobile, motorcycle industry
IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable With PLC Control
IEC 60332 Vertical Flame Propagation Test For Single Insulated Cable with PLC Control Product information: The single insulated wire vertical flammability test apparatus is designed and manufactured according to the standards IEC60332-1-2, IEC60332-1-1, IEC60695-11-2, IEC60332-1-3 and customized requirements, and is used to test single wire and cable or optical cable products vertical burning test to determine the burning characteristics of its insulating materials. The test
Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1
Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a 0.9mm needle-shaped burner that tilts with the angel of 45and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester conforms to the standard
