automobile testing equipment
"
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector
IEC 62196 Vehicle Testing Equipment 5000N Drive Over Test For Plug / EV Connector Product information: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Test principle: Accessories wired
PLC Control Vehicle Testing Equipment 150 kPa Automotive Rainproof Test
Automotive Rain Test Room Vehicles Cars Buses Trucks Rainproof Sealing Testing Chamber Standards & Clauses: QC/T476-2007 Rain Proof Performance Limit and Test Method for Bus QC/T4492010 Technical Conditions and Test Methods of Insulated and Refrigerated Vehicles clause 4.15 Samples and Restrictions: Insulation vehicles and refrigerated vehicles and insulated semi-trailers, refrigerated semi-trailers, passenger cars or special vehicles modified by passenger cars,
Vehicle Connectors Plugs Breaking Capacity / Normal Operation Durability Testing Equipment
Vehicle Connectors Plugs Breaking Capacity and Normal Operation Testing Machine PLC Control Standards & Clauses: IEC62196-1: 2014 Plug, socket-outlets, vehicle connectors and vehicle inletsConductive charging of electric vehicle-Part1: General requirements clause 22 and clause 23. IEC60309-1: 2012 Plug, socket-outlets and couplers for industrial purposesPart1: General requirements clause 20 and clause 21. Samples and Restrictions: Electric vehicle charging interfaces
400A 8 Channels Vehicle Testing Equipment Electric Car Vehicle Connectors Temperature Rise Test
8 Channels Electric Car Vehicle Connectors Temperature Rise Test System 400A PLC Control Standards & Clauses: IEC62196-1: 2014 Plug, socket-outlets, vehicle connectors and vehicle inletsConductive charging of electric vehicle-Part1: General requirements clause 24. IEC60309-1: 2012 Plug, socket-outlets and couplers for industrial purposesPart1: General requirements clause 22. Samples and Restrictions: Electric vehicle charging interfaces (plug, socket-outlets, vehicle
Single Station Vehicle Testing Equipment Non - Rewireable Accessories Mechanical Strength Flexing Test
Vehicle Non-rewireable Accessories Mechanical Strength 90 Flexing Testing Apparatus Standards & Clauses: IEC62196-1: 2014 Plug, socket-outlets, vehicle connectors and vehicle inletsConductive charging of electric vehicle-Part1: General requirements clause 26.4, figure 14 IEC60309-1: 2012 Plug, socket-outlets and couplers for industrial purposesPart1: General requirements clause 24.4, figure 9 Samples and Restrictions: Electric vehicle charging interfaces (plug, socket
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment System introduction: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground. It is required by IEC 62196-1:2022 clause 33, IEC 62752:2016 clause 9.34, etc. Accessories wired with the minimum size
IP56 Dust Chamber IEC 60529 Protection Against Dust Test Equipment
IEC 60529 Figure 2 IP56 Dust Chamber IP Code Testing Equipment Product information: The test device is suitable for sealing parts and enclosures sand and dust resistance capacity testing of the electrical and electronic products, car and motorcycles spare parts and seals. In order to detect the use, storage, transport performance of the electrical and electronic products, car and motorcycles spare parts and seals under the sand and dust environment. The test equipment uses
IEC 60529 Water Ingress Testing Equipment IPX1~IPX4 1m³ , Waterproof Test Chamber
IEC 60529 IPX1~IPX4 1m Waterproof Test Chamber Integrated Water Ingress Testing Equipment Overview: Application background: Natural water (rain, sea water, river water, etc.) damages products and materials. The damage causes unpredictable economic losses every year, mainly includes corrosion, fading, deformation, strength reduction, swelling, mold, etc. especially for electrical product that is easily broken into a fire due to a short circuit caused by rain. Therefore, IP
IEC 60529 Intelligent Water Ingress 200mm IPX1 IPX2 Rain Vertical Drip Testing Equipment
Wall-mounted IPX1 IPX2 Ingress of Water Inspection Vertical Drip Box Testing Equipment Product overview: The rain vertical dripping testing equipment is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water dripping at degree IPX1 and IPX2. The water ingress testing equipment ensures that the dripping speed reaches the standard required value by
