Payment & Shipping Terms:
|Spreay Heads:||3 Pieces||Water Pressure:||34.5Kpa (5 Psi)|
|Lower Nozzle Angle:||45° Up||Control Method:||Method|
|Rack Material:||Aluminum Profile||Testing Standards:||UL1993, UL60507, ANSI Z21.58, Etc.|
rain test chamber,
iec test equipment
UL Water Spray Test Apparatus 5 PSI Water Ingress Testing Equipment for Lamps
The testing equipment is used to verify the protective performance of the enclosure for self-ballasted lamps and lamp adapters under UL water spray environment.
The water ingress testing equipment applys spray test to test sample by controlling the water supply pressure and the distance between the nozzle and sample.
UL1993 “Self-Ballasted Lamps and Lamp Adapters” clause 24, figure 24.1 and 24.2
UL60507-ENGL 1999 figure 38.1 and 38.2
ANSI Z21.58 Figure 10/Figure 11
UL1598, UL153, UL154B, UL1703, UL8750, UL1741, UL514B, UL1278, UL1571, etc.
The device consists of a 3 UL spray heads, 3 pressure gauges, 3 control valves and a water supply pipe rack.
|Control & Operation||Manual|
|Spreay Heads||3 pieces (or 4 pieces optional, with one lower nozzle), manufactured according to UL1993figure 24.1|
|Spray Heads Positions||The positions of spray heads can be adjusted up or down through the water spray pipe rack, the spacing is made according to UL1993 Figure 24.2|
|Lower Nozzle Angle (Optional)||45° up|
|Water Pressure||At each head at approximately 34.5Kpa (5 psi), each spray head has a corresponding press gauge, total water flow pressure is 50-150Kpa|
|Distance between the center Nozzle and the Device||Approximately 1.4m (55 inches)|
|Rack||Material: high-grade aluminum profile with casters|
Contact Person: Manager