Home ProductsWater Ingress Testing Equipment

IPX3 IPX4 Oscillating Tube Test Equipment Needle Pinhole Aperture Φ0.4mm

Certification
China Sinuo Testing Equipment Co. , Limited certification
China Sinuo Testing Equipment Co. , Limited certification
Customer Reviews
Perfect on-site installation service, excellent training and technology support. Absolutely helps us a lot.

—— Aryan Das

Thanks. Your company is very professional, I am sure we will have good cooperation in the future.

—— Fernando Fuentealba

It's a great purchase, good products received with good packing, will back to you for next needs.

—— Sarah Rashad

I'm Online Chat Now

IPX3 IPX4 Oscillating Tube Test Equipment Needle Pinhole Aperture Φ0.4mm

large.img.alt
small.img.alt small.img.alt small.img.alt small.img.alt

Large Image :  IPX3 IPX4 Oscillating Tube Test Equipment Needle Pinhole Aperture Φ0.4mm

Product Details:
Place of Origin: China
Brand Name: Sinuo
Certification: Calibration Certificate (Cost Additional)
Model Number: SN444
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Customized
Packaging Details: Plywood
Delivery Time: 30 Days
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: 10 Sets Per Month
Detailed Product Description
IP Grade: IPX3 IPX4 Oscillating Tube Radius: R200~1600mm Optional
Oscillating Tube Material: Stainless Steel Needle Pinhole Aperture: Φ0.4mm
Water Flow: 1-10L/min Adjustable Control Method: PLC & Touch Screen
High Light:

rain test chamber

,

iec test equipment

IPX3 IPX4 Oscillating Tube Test System for Protection Against Spraying and Splashing Water

 

Overview:

 

This open type IPX3 and IPX4 oscillating tubes test system is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.

 

Standards compliant:

 

IEC 60529-2013 “Degrees of protection provided by enclosure (IP code)” IPX3 and IPX4
IEC 60598-1-2017 “Luminaries-Part1: General requirements and tests”

 

Structure:

 

The test equipment consists of an oscillating mechanism, an electrical control cabinet and a turntable. One end of the oscillating mechanism is mounted on the wall, and the other end of the oscillating mechanism is fixed on the floor support, the tube is caused to oscillate by motor driving. The turntable has a rotation speed of 1r/min, to make the enclosure of the specimen to be splashed in all directions. The test equipment is equipped with a water filter cleaning device to prevent pinhole blockage. This whole system adopts open structure.

 

 

Technical parameters:

 

Control & Operation PLC and touch screen intelligent control system
Oscillating Tube Radius

R200, R400, R600, R800, R1000, R1200, R1400, R1600mm are optional, made of stainless steel

IPX3 IPX4 Oscillating Tube Test Equipment Needle Pinhole Aperture Φ0.4mm 0

Needle Pinhole Aperture Φ0.4mm
Spray Holes Distribution

IPX3:over an arc of 60° either side of the center point (120°)

IPX4:over the whole 180° of the semicircle

Hole spacing: 50mm

IPX3/4 Switching Switching by changing a certain number of blind hole needles or through-hole needles
Oscillating Angle IPX3:120°(±60°); IPX4:350°(±175°)
Oscillating Speed

IPX3:4s /cycle(2×120°);

IPX4:12s /cycle(2×350°);

Water Flow 1-10L/min adjustable
Test Time 0.01S~99.9 min, can be preset
Turntable Diameter:Φ600mm, rotation speed: 1r/min, can pause at 4 angles, lifting height: 350-1000mm, load capacity: ≤50kg
Pressure Gauge 0~0.25MPa
Water Storage System The control box and the water storage tank are integrated, the water storage tank is equipped with a water level float valve to automatically control the water inlet, and has high and low water level alarm detection, to effectively prevent the pump from being damaged due to dry water.
Optional The handheld spray nozzle as per IEC 60529m figure 5 is optional
Safety Protection Phase sequence protection, leakage protection, water shortage protection, abnormal protection
Equipment Dimensions According to the sizes of the oscillating tubes selected
 

 

How to change the different oscillating tubes?

 

The connection parts of the oscillating tubes adopt flange structure, which is easy for disassembly and installation, and the support structure can be movable to achieve different distances, that makes the overall system can be compatible with different sizes oscillating tubes.

 

IPX3 IPX4 Oscillating Tube Test Equipment Needle Pinhole Aperture Φ0.4mm 1

 

Flange joint

 

Contact Details
Sinuo Testing Equipment Co. , Limited

Contact Person: Manager

Tel: +8613527656435

Send your inquiry directly to us (0 / 3000)