|
Product Details:
Payment & Shipping Terms:
|
| Applied Standard: | IEC 60061-3 | Gauge Type: | Go And Not Go Gauges |
|---|---|---|---|
| Material: | S136 Die Steel | Structure: | Refer To The Specific Figures |
| Test Specimen: | E14 E26 E27 E39 E40 Lampholders | Application: | Control Of Interchangeability And Safety |
| High Light: | IEC 60061-3 Lampholders Go Gauge,E14 E26 Lampholders Go Gauge |
||
E14 E26 E27 E39 E40 Go and Not Go Gauges IEC 60061-3
Product Overview:
The lampholder “Go” and “Not Go” gauges are manufactured according to relative requirements of IEC 60061-3, they are required by UL 496 2013 clause 5.2.4.2.
These lampholder gauges are used to check whether the dimensions and shapes of the lampholders meet standard requirements by using the lampholders interchangeable size gauges.
Main Parameters:
Material: made of die steel S136 material, anti-corrosion, wear-resistant and high accuracy.
E14, E26, E27, E39 and E40 lampholders “Go”/”Not Go” Gauges, total 10 pieces:
| Type | Description | Data Sheet Number | QTY |
| E14 | “Go” gauge | 7006-25-7 | 1 PC |
| “Not Go” gauge | 7006-26-4 | 1 PC | |
| E26 | “Go” gauge | 7006-25B-2 | 1 PC |
| “Not Go” gauge | 7006-26A-2 | 1 PC | |
| E27 | “Go” gauge | 7006-25A-2 | 1 PC |
| “Not Go” gauge | 7006-26-4 | 1 PC | |
| E39 | “Go” gauge | 7006-24E-1 | 1 PC |
| “Not Go” gauge | 7006-26-4 | 1 PC | |
| E40 | “Go” gauge | 7006-25-7 | 1 PC |
| “Not Go” gauge | 7006-26-4 | 1 PC |
Please refer to the relevant standard requirements of IEC 60061-3.
Take E27 lampholder Not Go Gauge for example:
IEC 60061-3: 7006-26-4 E27 Not Go Gauges for Screw Threads of Lampholders
The drawing is intended only to illustrate the essential dimensions of the gauge.
For details of screw thread of lampholders E10, EP10, EY10, E14, E27, E39 and E40, see sheets 7004-22, 7005-30, 7005-7, 7004-23, 7004-21, 7005-24A and 7004-24 respectively.
PURPOSE: To check the maximum minor diameter of the screw thread, dimenaion D1, of lampholders E10, EP10, EY10, E14, E27, E39 and E40.
TESTING: The screw thread of the lampholder shall be assumed to be correct if the gauge does not enter by its own weight so far that the thread protrudes beyond surface T.
Contact Person: Manager
Tel: +8613527656435
| Factory Address:#301, Building 2, No. 123 of Zhongsheng Road, Zhongcun Street, Panyu District, Guangzhou | |
| Sales office:#301, Building 2, No. 123 of Zhongsheng Road, Zhongcun Street, Panyu District, Guangzhou | |
| +86-020-39185976 | |
| sales@sinuotek.com | |
