Home ProductsVehicle Testing Equipment

Clause 10.2 “A” “B” Gauge For Checking Shutters 20N 1N Rigid Steel Wires

Certification
China Sinuo Testing Equipment Co. , Limited certification
China Sinuo Testing Equipment Co. , Limited certification
Customer Reviews
Perfect on-site installation service, excellent training and technology support. Absolutely helps us a lot.

—— Aryan Das

Thanks. Your company is very professional, I am sure we will have good cooperation in the future.

—— Fernando Fuentealba

It's a great purchase, good products received with good packing, will back to you for next needs.

—— Sarah Rashad

I'm Online Chat Now

Clause 10.2 “A” “B” Gauge For Checking Shutters 20N 1N Rigid Steel Wires

large.img.alt
small.img.alt small.img.alt small.img.alt small.img.alt

Large Image :  Clause 10.2 “A” “B” Gauge For Checking Shutters 20N 1N Rigid Steel Wires

Product Details:
Place of Origin: China
Brand Name: Sinuo
Certification: Calibration Certificate(cost additional )
Model Number: SN2110-5 & SN2110-6
Payment & Shipping Terms:
Minimum Order Quantity: 1 Set
Price: Negotiable
Packaging Details: Standard Exporting Plywood Case
Delivery Time: 30 days
Payment Terms: L/C, T/T
Supply Ability: 10 Sets / Month
Detailed Product Description
Standard Applied: IEC 62196-1 2020 Clause Applied: Clause 10.2, Fig. 9 & Fig. 10
Gauge A Force: 20N Gauge B Force: 1N
Gauge A Diameter: Φ3mm Gauge B Diameter: Φ1mm
High Light:

Clause 10.2 A Gauge

,

IEC 62196-1 B Gauge

 

IEC 62196-1 Gauge“A”Guage“B”for Checking Shutters 20N 1N Test Probes

 

Product information:

 

These two test gauges separately confirm to the IEC 62196-1Ed.4CDV 2020 clause 10.2, figure 9 and figure 10. The SN2211-5 test probe with 20N force and the SN2211-6 test probe with 1N force.

 

Technical parameters:

 

1. Gauge "A" with force of 20N SN2211-5

Rigid steel wire part: Φ3+0.03 0×1+0.015 0×80±0.5; end rounded: R0.2±0.05, with 20N force.

2. Gauge "B" with force of 1N SN2211-6:

Rigid steel wire part: Φ1+0.015 0×80±0.5; end rounded: R0.05, with 1N force.

 

No.: Item Specification
1 Gauge “A” with force of 20N SN2211-5 Rigid steel wire part: Φ3+0.03 0×1+0.015 0×80±0.5; end rounded: R0.2±0.05, with 20N force.
2 Gauge “B” with force of 1N SN2211-6 Rigid steel wire part: Φ1+0.015 0×80±0.5; end rounded: R0.05, with 1N force.
 

Test procedures (Excerpt from IEC 62196-1Ed.4CDV 2020 clause 10.2):

 

An electrical indicator with a voltage between 40 V and 50 V included is used to show contact with the relevant part.
Compliance is checked by inspection and for socket-outlets with a plug completely withdrawn by applying the above gauges as follows.
The gauge according to Figure 9 is applied to the entry holes corresponding to the live contacts and to any other opening of the engagement surface with a force of 20 N.
The gauge is applied to the shutters in the most unfavourable position, successively in three directions, to the same place for approximately 5 s in each of the three directions.
During each application the gauge shall not be rotated, and it shall be applied in such a way that the 20 N force is maintained. When moving the gauge from one direction to the next, no force is applied but the gauge shall not be withdrawn.
A steel gauge, according to Figure 10, is then applied with a force of 1 N and in three directions, for approximately 5 s in each direction, with independent movements, withdrawing the gauge after each movement.
For socket-outlets and vehicle inlet with enclosures or bodies of thermoplastic material, the test is made at an ambient temperature of (35 ± 2) °C, both the socket-outlets and the gauge being at this temperature.

Clause 10.2 “A”  “B” Gauge For Checking Shutters 20N 1N Rigid Steel Wires 0

Work Together with Sinuo Electrical Indicator

 

 

Contact Details
Sinuo Testing Equipment Co. , Limited

Contact Person: Manager

Tel: +8613527656435

Send your inquiry directly to us (0 / 3000)