Home ProductsBattery Testing Equipment

IEC 62133-2 Battery Testing Equipment 2017 Secondary Cells / Batteries Forced Internal Short Circuit Test

Certification
China Sinuo Testing Equipment Co. , Limited certification
China Sinuo Testing Equipment Co. , Limited certification
Customer Reviews
Perfect on-site installation service, excellent training and technology support. Absolutely helps us a lot.

—— Aryan Das

Thanks. Your company is very professional, I am sure we will have good cooperation in the future.

—— Fernando Fuentealba

It's a great purchase, good products received with good packing, will back to you for next needs.

—— Sarah Rashad

I'm Online Chat Now

IEC 62133-2 Battery Testing Equipment 2017 Secondary Cells / Batteries Forced Internal Short Circuit Test

large.img.alt
small.img.alt small.img.alt small.img.alt

Large Image :  IEC 62133-2 Battery Testing Equipment 2017 Secondary Cells / Batteries Forced Internal Short Circuit Test

Product Details:
Place of Origin: China
Brand Name: Sinuo
Certification: Calibration Certificate (Cost Additional)
Model Number: SN551
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Customized
Packaging Details: Plywood
Delivery Time: 1 Month
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: 20 Sets Per Month
Detailed Product Description
Temperature Range: -20℃ ~ +100℃ Refrigeration Compressor: Tecumseh Compressor
Heating System: Electrical Heater Control System: Micro-computer Controller
Speed Range: 0.01-20MM/S Effective Range: 0~ 150mm
High Light:

high frequency vibration generator

,

battery discharge analyzer

IEC 62133-2 2017 Secondary Cells and Batteries Forced Internal Short Circuit Testing Equipment
 
Overview:
This battery forced internal short-circuit tester is an integral testing equipment to performance a comprehensive test for temperature, voltage, internal-short circuit, which is applicable for battery cell safety test.
The battery is placed between crush boards, oil cylinder apply force to battery through piston, when system reach the setting value or voltage reach these setting value, system release pressure and return.
 
Standard Compliant:
It conforms to IEC 62133-2012.8.3.9., IEC 62133-2:2017 clause 7.3.9, JISC8714:2007 5.5, and etc.
 
Feature:
1. Fullycomputerized, comprehensive testing force, deformation, voltage parameters;
2. Electrohydraulic servo drive, force, displacement, voltage display on same interface.
3. Innerbuilt sensor, not influence by outer environment;
4. Force sensor located on top of the cylinder, not influenced by inner temperature, higher accuracy;
5. Internal chamber designed as mirror stainless steel with viewing window, door lamp, air-blower as well as universal wheels that easy to move
6. Computer control method to pre-set all parameters with excellent appearance and real-time monitoring.
 
Temperature Chamber Technical Parameters:
 

Temperature Range-20℃ ~ +100℃(Controllable)
Resolution0.01℃
Temperature Fluctuation0.5℃
Temperature Uniformity2.0℃
Max. Low Temperature-5℃
Temperature Rising RateAve.3℃/min(0℃ to100℃,Nonlinear No-load)
Temperature Cooling RateAve.1℃/min(100℃to0℃,Nonlinear No-load)
Inner Chamber DimensionW600 X H750 X D500MM
Inner Chamber MaterialMirror stainless steel with bottom reinforcement

External Chamber
Dimension

W1500mm*D1000mm*H1750mm

External Chamber
Material

Cold-Rolled Steel with paint-baking treatment (gray-white color)
Insulation Layer

The thermal isolation layer up to100mm, which employs fire-resistance high density PU foam material and the
thermal isolation coefficient less than0.0212kcal/m∙hr.

Chamber DoorSingle Door, Overall Size: 500×750mm
Observation Window

Single Door mountedwith3 layer vacuum glass viewing window with water-proof function (size: W430mm x H
580mm), the door framed signed with electrical heating function (automatic adjustment) to proof frost, dew,
thus, provide the user a clear vision to observe entire testing process;

Testing Hole

On the left side of test chamber, attesting hole withitsdiameter50mm is opened with silicone rubber plug and
Stainless steel cap/2pcs;

Sealing

Imported silicone glue is applied for door frame and test chamber sealing to provide a reliable sealing
performance;

Internal LightingViewing window with 9WPhilipis LED lamp with energy-saving and moisture and explosion proof function
Refrigeration System

1.AirCoolingMethod: Fully Enclosed single-stage compressor
2.Compressor: FranceTecumsehCompressor1 set
3.Coolant: fluoride-free environmental coolant (USA DuPont) HFCR404A
4.Condenser: Air-cold highly efficient forced exchange fin type
5.Vaporizer: highly efficient multi-stage vaporizer with Hydrophilic membrane fin (thicker fin type)
6.Oil Separator: EMERSON
7.Vaporizer Pressure Regulator: Danfoss vaporizer pressure regulator (available to work in low temperature and
High humidity condition without no frosting)
8.Solenoidvalve: Japan saginomiya or Danfoss;

Heating System

1.Heater: Naked-nichrome alloy electrical heater
2. Control Method: signal output from controller through the SSR to gain a high precise non-contact switching
control

Control System

1.Control Method: Programmable high accurate micro-computer controller: chilled-mirror dew-point hygrometer
To control temperature and humidity system. Anti-windup PID, BTC control method (thermal compensation
function) +DDC intelligent cool flow control+ DEC intelligent electrical control (temperature test alternative
testing program setting)
2.TEMI 880 color touchscreen controller to display temperature and humidity with EN menu. And 3.1’’LCD
controller is compatible with computer control.

 

Internal Short Circuit Chamber Main Technical Parameters:
 

Max. Loading200KG
Resolution1/10000
Force Accuracy≤0.5%
Force Magnification7-stageautomatic shift
Displacement Resolution1/1000
Displacement Accuracy≤0.5%
Speed Range0.01-20MM/S
Effective Range0~ 150mm
Max. Testing Plane300X300MM (Available to custom design to meet special test)
Voltage Acquisition Range0~20V
Voltage Resolution1mV
Voltage Acquisition Frequency100Hz
Power Source220V 60HZ
 

 
Standard Configuration:

 

1.Temperature Chamber& Servo control system1set

2. Brand Computer: 19 inch LCD monitor,Yonah™2,dual core, 2GB DDR2,320GB /1set

3. Computer Rack/1set

4. Voltage Acquisition system 1set

5. Servo Control software

6. Block5X5MM 1pcs,10X10MM 1pcs(additional5x5 mm(+5Pcs) , 10x10 mm(+5Pcs) nitrile rubber)

IEC 62133-2 Battery Testing Equipment 2017 Secondary Cells / Batteries Forced Internal Short Circuit Test 0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7. 
IEC 62133-2 Battery Testing Equipment 2017 Secondary Cells / Batteries Forced Internal Short Circuit Test 1
 

8. Pressure Sensing System1set

9. Smoke exhaust system 1Set

 

Contact Details
Sinuo Testing Equipment Co. , Limited

Contact Person: Manager

Tel: +8613527656435

Send your inquiry directly to us (0 / 3000)