Home ProductsVehicle Testing Equipment

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment

Certification
China Sinuo Testing Equipment Co. , Limited certification
China Sinuo Testing Equipment Co. , Limited certification
Customer Reviews
Perfect on-site installation service, excellent training and technology support. Absolutely helps us a lot.

—— Aryan Das

Thanks. Your company is very professional, I am sure we will have good cooperation in the future.

—— Fernando Fuentealba

It's a great purchase, good products received with good packing, will back to you for next needs.

—— Sarah Rashad

I'm Online Chat Now

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment
IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment

Large Image :  IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment

Product Details:
Place of Origin: China
Brand Name: Sinuo
Certification: Calibration Certificate (Cost Additional)
Model Number: SN11010
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Negotiation
Packaging Details: Plywood
Delivery Time: 1 Month
Payment Terms: L/C, T/T, Western Union, MoneyGram
Supply Ability: 20 Sets Per Month
Detailed Product Description
Crushing Force: 5000N And 11000N Roll Over Speed: (8±2)km/h
Drive Over Tire: Michelin Tire (P225 / 75R15) Air Pressure Of Tire: (2.2±0.1) Bar
Test Floor: Concrete Surface Control Mode: PLC Or Computer
Applied Standard: IEC 62196 Clause 33.2 And 33.3 Testing Purpose: Drive Over Testing
High Light:

IEC 62196 Vehicle Plugs Testing Equipment

,

11000N Drive Over Vehicle Tester

 

IEC 62196 Vehicle Drive Over Testing System for Vehicle Connectors and Plugs

 

System introduction:

 

The vehicle drive over test system is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it is provided with a cable management system which prevents the accessory from being left on the ground.

 

Accessories wired with the minimum size cable of a type recommended by the manufacturer shall be placed on a concrete floor in any normal position of rest. A crushing force of (5000±250) N or (11000±550) N shall be applied by a conventional automotive tire, P225/75R15 or an equivalent tire suitable for the load, mounted on a steel rim and inflated to a pressure of (2.2±0.1) bar. The wheel is to be rolled over the vehicle connector or plug at a speed of (8±2) km/h. The accessory is to be oriented in a natural resting position before applying the force in a different direction for each sample. The accessory under test shall be held or blocked in a fixed position so that it does not move substantially during the application of the applied force. In no case is the force to be applied to the projecting pins.

 

Applied standard:

 

IEC 62196-1Ed.4CDV 2020 clause 33.2 and 33.3.

 

Technical Parameters:

 

Test Station Single
Electrical Control Method PLC intelligent integrated control, color humanized touch interface operation (computer operation is optional)
Drive Mode Motor driven
Load Carrying

A. Crushing force (5000±250) N

B. Crushing force (11000±550)

Roll Over Speed (8±2)km/h
Roll Over Method The linear motor module is used to drive the automotive tire to simulate the front and rear reciprocating rolling motion (to simulate the damage caused by the accidental rolling to the vehicle connector or plug during the forward or reverse moving of the car in the real scene)
Crushing Force Loading using a servo motor with a worm gear reducer to apply the crushing force
Crushing Force Display and Adjustment Branded force sensor is used, and the force range is 0-20000N adjustable
Drive Over Tire Michelin tire (P225 / 75R15)
Air Pressure of Tire (2.2±0.1) bar
Test Floor A bottom plate with cement/ concrete surface, which can be equipped with a fixture
Function Box of Specimen Made of aluminum alloy, it can be adjusted up and down, right and left, and easy for installing various types of specimen, combined structure, easy to be installed and fixed
Lifting Device Imported guide, it allows the load to be moved up and down freely
Specimen Installation Electric winch lifting and restructuring
Timing Counting Display Can be display and set on the touch screen
Shock Absorption Method Damping spring
 

The equipment adopts the working mode of front and rear driving of the tire (the direction of rolling is driven by the positive and negative rotation of the servo motor), keeping the sample fixed, achieve the most realistic simulation of the reciprocating rolling of the automobile tire, thus effectively carrying out simulated crushing on the specimen.

 

 

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment 0
 
 

Contact Details
Sinuo Testing Equipment Co. , Limited

Contact Person: Manager

Tel: +8613527656435

Send your inquiry directly to us (0 / 3000)