Payment & Shipping Terms:
|Rod Diameter:||φ40 Mm||Rod Material:||Stainless Steel|
|Rod End Shape:||Hemispherical||Handle Material:||Nylon|
|Handle Length:||100 Mm||Applied Standard:||IEC60335-2-14|
|Applied Clause:||Clause 20.103||Test Sample:||Hand-held Blender|
40Mm Cylinder Rod Test Probe,
IEC 60335-2-14 Cylinder Rod Test Probe,
Hemispherical End Rod Test Probe
IEC60335-2-14 Hand-held blenders φ40 mm Cylinder Rod Test Probe
Standard and Application:
The φ40mm cylinder rod meets the standard requirements of IEC 60335-2-14 Clause 20.103.
It is used to verify the hand-held blenders other than hand-held food mixers provided with a blender attachment shall incorporate a biased-off switch, its actuating member being positioned in a recess or otherwise guarded to prevent accidental operation.
|Probe end shape||Hemispherical|
|Probe material||Stainless steel|
Test Procedures and Operation:
Please refer to the relevant standards.
Take IEC 60335-2-14 Clause 20.103 as an example:
Compliance is checked by applying a cylindrical rod, having a diameter of 40 mm and a hemispherical end, to the actuating member of the switch. The test rod is applied with a foce not exceeding 5 N. The appliance shall not operate.
The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge. At the end of our probe handle, there is a M6 thread hole to match the force gauge. Showing as following reference picture:
Contact Person: Manager