|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 sets per month |
IEC 60898-1 Resistance To Mechanical Stress And Shock Tester For Testing Switch Sockets
Product Information:
The test equipment conforms to the standard requirements of IEC 61009-1:2012, IEC60898-1:2015, etc.
It is used for switch sockets, surface-mounted installation boxes, contactors, molded case AC air circuit breakers, etc., to verify the impact resistance of exposed parts that may be subjected to mechanical impact during normal use.
Test principle: According to the test Eha: the pendulum, the impact element is released freely at a certain height through a 1-meter pendulum, hits the sample at the lowest point in the vertical direction, and through the transformation of gravitational potential energy into kinetic energy, the purpose of impact testing on the sample is achieved.
Features: This equipment, also known as low-energy pendulum impact test device, adopts a floor-standing structure and does not need to be installed. The sample mounting bracket can be adjusted up and down, left, right, and front and rear. At the same time, it can be adjusted around the axis perpendicular to the mounting plate and the mounting plate can rotate around the vertical axis, a total of wuzhou2 adjustable. The swing rod can adjust the release angle through the pivot, so as to achieve the impact on different positions of the front and side of the sample, covering the impact test requirements of most similar products.
Technical Parameters:
| Model | SN2507 |
| Applicable sample range | Panel mount, rail mount, recessed, panel mount circuit breaker |
| Impact element head | R10 polyamide, hardness HR100 |
| Impact element mass (equivalent mass) | 150±1g(200g) |
| Mounting bracket quality | 10±1Kg |
| Mounting brackets | Can rotate ±90° around the mounting plate, the mounting plate can rotate ±90° around the vertical axis, X, Y, Z three axes can be adjusted |
| Position regulation | Bracket X-100～100mm, Y-100～100mm, Z-100～100mm stroke adjustable |
| Swing pendulum | A steel pendulum with a length of 1000±1mm, a mass of 100±1g, a material outer diameter of 9 mm, and a wall thickness of 0.5 mm |
| Impact height | 0-500mm, scale display (corresponding angle conversion) |
| Circuit breaker mounting plate | 175*175*8 laminated board |
| Specimen fixture |
Non-enclosed circuit breaker mounting fixture
Panel mount circuit breaker mounting clamps
|
| Dimension | 860mm×650mm×2000mm |
| Weight | About 140 KG |
Table 2 Height of Fall
| Energy /J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 | ||
| Equivalent Mass /kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0.25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Height of Fall ±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
| Note 1, see note 3.2.2; Note 2, the energy unit of this part of the joule (J) is derived from the standard gravity acceleration (g), the whole value of g round: 10m / s2. | |||||||||||||||
Video
Video
|
|
| MOQ: | 1 |
| Price: | Customized |
| Standard Packaging: | Plywood Case |
| Delivery Period: | 30 Days |
| Payment Method: | T/T |
| Supply Capacity: | 10 sets per month |
IEC 60898-1 Resistance To Mechanical Stress And Shock Tester For Testing Switch Sockets
Product Information:
The test equipment conforms to the standard requirements of IEC 61009-1:2012, IEC60898-1:2015, etc.
It is used for switch sockets, surface-mounted installation boxes, contactors, molded case AC air circuit breakers, etc., to verify the impact resistance of exposed parts that may be subjected to mechanical impact during normal use.
Test principle: According to the test Eha: the pendulum, the impact element is released freely at a certain height through a 1-meter pendulum, hits the sample at the lowest point in the vertical direction, and through the transformation of gravitational potential energy into kinetic energy, the purpose of impact testing on the sample is achieved.
Features: This equipment, also known as low-energy pendulum impact test device, adopts a floor-standing structure and does not need to be installed. The sample mounting bracket can be adjusted up and down, left, right, and front and rear. At the same time, it can be adjusted around the axis perpendicular to the mounting plate and the mounting plate can rotate around the vertical axis, a total of wuzhou2 adjustable. The swing rod can adjust the release angle through the pivot, so as to achieve the impact on different positions of the front and side of the sample, covering the impact test requirements of most similar products.
Technical Parameters:
| Model | SN2507 |
| Applicable sample range | Panel mount, rail mount, recessed, panel mount circuit breaker |
| Impact element head | R10 polyamide, hardness HR100 |
| Impact element mass (equivalent mass) | 150±1g(200g) |
| Mounting bracket quality | 10±1Kg |
| Mounting brackets | Can rotate ±90° around the mounting plate, the mounting plate can rotate ±90° around the vertical axis, X, Y, Z three axes can be adjusted |
| Position regulation | Bracket X-100～100mm, Y-100～100mm, Z-100～100mm stroke adjustable |
| Swing pendulum | A steel pendulum with a length of 1000±1mm, a mass of 100±1g, a material outer diameter of 9 mm, and a wall thickness of 0.5 mm |
| Impact height | 0-500mm, scale display (corresponding angle conversion) |
| Circuit breaker mounting plate | 175*175*8 laminated board |
| Specimen fixture |
Non-enclosed circuit breaker mounting fixture
Panel mount circuit breaker mounting clamps
|
| Dimension | 860mm×650mm×2000mm |
| Weight | About 140 KG |
Table 2 Height of Fall
| Energy /J | 0.14 | 0.2 | (0.3) | 0.35 | (0.4) | 0.5 | 0.7 | 1 | 2 | 5 | 10 | 20 | 50 | ||
| Equivalent Mass /kg | 0.25 | (0.2) | 0.25 | (0.2) | 0.25 | (0.2) | (0.2) | 0.25 | 0.25 | 0.25 | 0.5 | 1.7 | 5 | 5 | 10 |
| Height of Fall ±1%mm | 56 | (100) | 80 | (150) | 140 | (200) | (250) | 200 | 280 | 400 | 400 | 300 | 200 | 400 | 500 |
| Note 1, see note 3.2.2; Note 2, the energy unit of this part of the joule (J) is derived from the standard gravity acceleration (g), the whole value of g round: 10m / s2. | |||||||||||||||
