Payment & Shipping Terms:
|Working Volume:||Can Be Customized||Air Velocity:||≤2m / S|
|Vacuum Pumping Speed:||60-600L/min||Air Flowmeter Range:||1-25L/min|
|Dust Concentration:||2Kg /m³||Control Method:||PLC|
constant temperature chamber,
ess test chamber
IEC 60598-1 Sand and Dust Test Chamber for IP5 IP6 Protection Against Solid Foreign Objects
Standards & Clauses:
IEC60598-1:2014 “Luminaries-Part1: General requirements and tests”
IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IP5 & IP6
Samples and Restrictions:
Electrical and electronic products, automobiles & motorcycle parts, seals, lamps
To verify the performance of the use, storage and transportation of electronic and electrical products, automobiles & motorcycle parts, seals and lamps in a dusty environment, to determine the possible harmful effects to the product by the particles carried by the air stream.
There is a conical funnel with dust collection port at the bottom; the suction port of the high-pressure turbine circulation fan is installed at the dust extraction port (at the bottom), and the collected dust is sent to the top of the inner chamber and freely sprinkle from top to bottom.
It can simulate an open, dusty air environment condition induced by the natural environment or by human disturbances such as vehicle motion.
The machine adopts a closed chamber structure, a suspended man-machine interface operation device, a large visual window, the test circulates inside the cabinet. The inner chamber adopts a mirror panel and a special air duct design, which ensures to produce a standard concentration of laminar airflow in the chamber, there is a vacuum suction device is arranged.
The main structure includes outer chamber, inner chamber, dust suction port, dust recycling funnel, circulating dust blowing device, vacuum system, dust storage tank, flow valve, heating system, reverse flow blade, protective plug.
Power supply: AC380V±5%/50Hz,3KVA or match client’s local power supply requirements
Use place: temperature 15-35 ° C, relative humidity 25%-75%, atmospheric pressure 86~106kpa (860 mbar-1060 mbar); no sharp shaking, no vibration, no electromagnetic interference, no dust, no explosive & corrosive gas, with good heat dissipation
|Control & operation||PLC & touch screen|
|Inner size: WDH=800*800*800 mm||Inner size: WDH=1000*1000*1000mm|
Nominal wire diameter: Ф50µm,nominal width of a gap between wires: 75µm
|Talcum powder||Dry talcum powder which can pass through the square-meshed sieve|
|Dust concentration||The amount of talcum powder in the test chamber is 2Kg /m³|
|Air velocity||≤2m / s|
|Air flow meter||1-25L/min, digital display|
|Test time||1s~99 H 59 m 59s, can be preset|
|Dust blowing period||Stop/blowing time: 1s~99 H 59 m 59s, can be preset|
|Vacuum pumping speed||60-600L/min|
|Blower||Full plastic centrifugal fan|
|Heating device||New ceramic heating frame|
|Safety protection||Phase sequence protection, leakage protection, over temperature protection, abnormal protection|
Contact Person: Manager