Home ProductsLed Testing Equipment

IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen

Certification
China Sinuo Testing Equipment Co. , Limited certification
China Sinuo Testing Equipment Co. , Limited certification
Customer Reviews
Perfect on-site installation service, excellent training and technology support. Absolutely helps us a lot.

—— Aryan Das

Thanks. Your company is very professional, I am sure we will have good cooperation in the future.

—— Fernando Fuentealba

It's a great purchase, good products received with good packing, will back to you for next needs.

—— Sarah Rashad

I'm Online Chat Now

IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen

IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen
IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen

Large Image :  IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen

Product Details:
Place of Origin: China
Brand Name: Sinuo
Certification: Calibration Certificate (Cost Additional)
Model Number: SN996
Payment & Shipping Terms:
Minimum Order Quantity: 1
Price: Customized
Packaging Details: Plywood
Delivery Time: 30 Days
Payment Terms: L/C, , T/T, Western Union, MoneyGram
Supply Ability: 20 sets per month
Detailed Product Description
Display: 7” Touch Screen Interface. Test Rate: 0.1 To 10 Beats / Min.
Rotation Center Height: 1200mm. Tensile Movements Stroke: 0-500mm.
Action Angle Of Rotation: 0-360°. Controller: PLC.
High Light:

Led Lamp Adjustment Testing Equipment

,

IEC 60598-1 Adjustment Testing Equipment

,

PLC Led Lamp Adjustment Testing Equipment

IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen Display

 

Product information:

The test equipment is designed and manufactured according to clause 4.14.3 of IEC 60598-1, mainly used for the lamps adjustment devices’ torsion, and bending test of the table lamps, floor lamps and the lamps which are for professional use (such as a plotter lamps).

The test device is with digital control technology and drive mechanism. The reverse and bending angles, drawing stroke, rotation angle, test speed and test cycle can be set. Once the test is completed or failed, the test device will alarm.

 

Product features:

Adjusting devices and means of adjustment, for example joints, hoisting devices, adjusting brackets or telescopic tubes, shall be so constructed that cords or cables are not pressed,clamped, damaged or twisted along the longitudinal axis by more than 360° during operation. NOTE If a luminaire has more than one joint the 360° limit applies to each joint if they are not too close together. Each case needs to be judged on its own merits.
Compliance is checked by the following test:
A cycle of operation is a movement from one extreme of the range to the other and back to the starting position. The rate of movement shall not cause he device to heat appreciably and shall not exceed 600 cycles per hour.

Compliance is checked by inspection.
After the test, not more than 50 % of the strands in a conductor shall be broken nor shall there be any serious damage to the insulation, if any, of the flexible cord. The cord or cable shall be subjected to, and shall satisfy, the insulation resistance and high-voltage tests specified in Section 10.
Ball-joints and the like, where the clamping means can be adjusted, are tested with the joints only lightly clamped to avoid excessive friction. If necessary, the clamping areas are readjusted during the test. For adjusting devices that consist of a flexible tube, the range of adjustment for this test is normally 135° in both directions from the vertical. However, where this adjustment cannot be achieved without using unreasonable force, the flexible tube is bent only to the positions where it will remain by itself.

 

Main technical parameter:

Test rate The test rate can be set, set ranging from 0.1 to 10 beats / min.
Bending angle

The bending angle can be set, the swing range of vertical lines on both sides of

0-180°.

Rotation center height 1200mm.
Maximum radius R500mm.
Tensile movements stroke 0-500mm
Action angle of rotation 0-360°
Test cycles Can be set, the number of cycles range 1-999999.
Test range The fixtures can meet a variety of samples within the standard range of testing needs.
Motor Stepper motor.
Controller Plc
Display 7” touch screen interface
Language English interface
Dimensions 680*680*1500mm
Power supply Ac110v,60hz

 

IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen 0

 

IEC 60598-1 Table Lamp Adjustment Testing Equipment Touch Screen 1

Contact Details
Sinuo Testing Equipment Co. , Limited

Contact Person: Manager

Tel: +8613527656435

Send your inquiry directly to us (0 / 3000)