Payment & Shipping Terms:
|Applied Standard:||IEC 60335-2-15||Applied Clause:||Clause 22.103|
|Control Mode:||PLC||Display Mode:||7" Touch Screen|
|Withdrawn Stroke:||0-100mm Adjustable||Test Times:||0-999999 Times|
|Load Voltage:||0-250V||Load Current:||0-15A|
Clause 22.103 Withdrawn Endurance Tester,
kettles insertion Withdrawn Endurance Tester,
PLC Electrical Appliance Testing Equipment
IEC 60335-2-15 Cordless Kettles Insertion And Withdrawn Endurance Tester
The water kettles insertion and withdraw endurance tester is designed and manufactured according to the standard IEC60335 -2- 15 clause 22.103, it is used to test the service life of the cordless kettle’s base contact. This device can be preset the number of trials (up to 999999 times), can do load test and non load test. It can automatically record the number of test times and the number of conduction times during the testing, when the actual test times reaches to the the preset test times, the device will automatically shuts down.
1. This equipment is controlled by the PLC, and uses a stepping motor to drive the ball screw forward and backward to realize the reciprocating action of the manipulator.
2. The entire process can be operated on the touch screen, the parameters can be preset, including the number of kettle plug-in tests, time, stroke, speed, etc. The touch screen has manual adjustment functions and real-time position display functions, so the cooperation between the sample and the device can be more accurately and effectively adjusted.
3. Multifunctional fixture, of which the height is adjustable for different kettle tests.
4. Load test and no-load test can be automatically switched or independently tested. The device has a built-in load, and it can be used by plugging the kettle into the power supply socket on this device.
5. With auxiliary mechanism, it can effectively supplement the switch on and off action during load test.
6. It adopts floor-standing structure, can move freely with casters, rigid frame, it is with good stability, spraying sealing plate, aluminum sandblasting fixture, the appearance is beautiful and practicability is strong.
|No.:||Item||Main manipulator||Auxiliary device|
|1||Operation method||Operated on touch screen||Operated on touch screen|
|2||Displacement||0-100mm can be preset||0-25mm can be preset|
|3||Speed||0-100mm/s can be preset||0-20mm/s can be preset|
|5||Test cycle||0～999999 can be preset||0～999999 can be preset|
|6||Test Time||0-999.9s can be preset||0-999.9s can be preset|
|7||Fixture||Main manipulator fixture||Auxiliary device fix|
|8||Load voltage and current||0-250V,0-15A adjustable|
|9||Load and non-load test||Automatic switching|
|10||Test station||Single station (can be customized)|
|11||Power supply||220V 50Hz or match client's local power supply requirements|
|12||Equipment dimensions and weight||83*50*104cm,150kg|
Contact Person: Manager
Applied Standard: EN 16825:2016
Opertation: Weinview 7” touch screen
Door opening and closing speed 0-10 times/min, can be preset on the touch screen , can be adjustable: 0-10 times/min, can be preset on the touch screen , can be adjustable
Door opening and closing interval time: it can be preset on the touch screen, 0-99H59M59S can be adjustable