IEC 60068-2-1 Double Open Door Programmable Environmental Test Chamber 1540L
| Applied standard: | IEC60068-2-1 | Working volum: | 1540L |
| Inner size: | 1100 ×1000× 1400(mm) | Humidity range: | (20 ~ 98) % RH |
| Temperature range: | -50 ℃~+120℃ | Door Type: | Double-Open Door |
| Inner Chamber Material: | SUS304# Stainless Steel Plates | Outer Chamber Material: | Spray Treatment A3 Plates |
| High Light: | 1540L Environmental Test Chamber,IEC 60068-2-1 Environmental Test Chamber |
||
IEC 60068-2-1 Double-Open Door Programmable Environmental Test Chamber 1540L
Product overview
This programmable constant enviromental test chamber suitable for determining the adaptability of electronic and electrical products, components and materials for use and storage under high and low temperature and certain humidity and heat conditions. The performance indicators have reached the international standards:
IEC60068-2-1:2007 “Environmental Testing-Part 2-1: Tests-Test A: Cold, IDT”
IEC60068-2-2:2007 “Environmental Testing-Part 2-1: Tests- Test B-Dry heat, IDT”
IEC60068-2-78:2012 “Environmental Testing-Part 2-78: Tests-Test Cab: Damp heat, steady state, IDT”
IEC60068-2-30:2005 “Environmental Testing-Part 2-30: Tests-Test Db: Damp heat, cyclic (12h+12h cycle), IDT”
Technical parameters
| Nominal content volume | 1540L |
| Inner chamber size | W(1100)mm ×D(1000)mm× H(1400)mm |
| External dimensions | Approx. W(2150)mm ×D(1500)mm× H(1920)mm |
| Weight | Approx. 850KG |
| Temperature range | Temperature range: -50 ℃～+120℃ |
| Humidity range |
(20 ～ 98)% RH (refer to temperature and humidity controllable range chart, no active wet and heat load)
Temperature and humidity controllable range chart |
| Temperature fluctuation | ≤±0.5℃ (The temperature fluctuation is half of the difference between the measured maximum temperature and the minimum temperature at the center point) |
| Temperature uniformity | ±2.0℃ (Temperature uniformity is the arithmetic mean of the difference between the highest and lowest temperature measured in each test) |
| Heating time | ≥3℃/ min (non-linear under no load) |
| Cooling time | ≥1℃-1.2℃ /min (non-linear under no load) |
| Relative humidity error (Damp heat only) |
±3%RH |
| Temperature and humidity display accuracy | 0.01°C/0.1% RH |
|
Working noise
|
Sound level≤85dB (Measured in a soundproof room with an ambient temperature of 25 ° C and low echo; using A weighting, the average value of 8 points is tested; each test point is 1 meter away from the noise source and 1 meter away from the ground) |
This programmable constant environmental test chamber breaks through traditional design style, having refined and beautiful appearance. Especially the creative idea of double-open door device and ideal assembly design, it is extremely convenient to install and handle.
The material of inner war is SUS304# stainless steel plate, and the material of chamber insulation is rigid polyurethane foam + glass fiber.
SAE J2527 Water-Cooled Xenon Weathering Test Chamber For Material Aging Simulation testing
SAE J2527 Water-Cooled Xenon Weathering Test Chamber For Material Aging Simulation Testing Product Overview: The SN883-X65 Water-Cooled Xenon Weathering Test Chamber is a high-performance accelerated aging system designed to simulate long-term outdoor environmental exposure within a short test ...
UV-A / UV-B Chamber Type Accelerated Weathering Test Chamber For Materials
UV-A / UV-B Chamber Type Accelerated Weathering Test Chamber This advanced weathering test chamber simulates the damaging effects of sunlight, rain, and dew on materials. Using fluorescent UV lamps to replicate sunlight and condensation to mimic rain and dew, it subjects test materials to alternatin...
IEC 60068-2-1 Environmental Test Chamber 1000L -70°C to +150°C
IEC 60068-2-1 Environmental Test Chamber 1000L for Temperature and Humidity -70°C~+150°C Product overview: This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical appliances, plastics, etc. The purpose is to ...
210L Industrial Drying Oven 300°C Max for Laboratory Use
210L Industrial Drying Oven For Laboratory 300°C Max For Herbal/ Food /Aging Test Use Product Description This high-performance 210L drying oven is designed to meet diverse heating and drying needs across multiple industries. With a fast heating system, precise temperature control, and adjustable ...
